Filter
Top Products
Building a Custom Portable Program
User’s Guide 117
Figure 87. The Input Properties: Display Tab
5. Create a special register for the input data to keep it separate from
other data.
Figure 88. The Input: Item Properties Dialog: Store Info Tab
6. Click on the Store Info tab. Select Register from the Data Desti-
nation
pull-down list, as shown in Figure 89 on page 117.
Figure 89. Pull-down List of Available Program Registers
A Register is a temporary holding place for data. Unless you specify otherwise, the
program stores input data in a register named
Default Register. \
2342.book Page 117 Thursday, July 22, 2004 8:35 AM