Filter
Top Products
Building a Custom Portable Program
User’s Guide 119
The Output: Error Beep Node
Now you need to set the Output node to sound a beep. Complete the follow-
ing steps:
1. Double-click the Output: Error Beep node to display its dialog box.
Figure 91. The Output: Error Beep Dialog Box
2. On the Information to Output tab, select System as the Output To
setting and Constant as the Data Source setting.
• In the constant field, enter the characters .+ (period and plus).
This is the command to sound a high beep.
•Or enter .– to sound a low beep.)
3. Press
OK to save your settings and exit the dialog box.
The Display: Error Text Node
You can have a special message appear when the error beep is sounded.
Double-click on the
Display: Error Text node, enter the text shown in Figure 92,
and press
OK.
Figure 92. The Display: Error Text Dialog Box
2342.book Page 119 Thursday, July 22, 2004 8:35 AM