Filter
Top Products
Creating New Nodes
User’s Guide 71
Operand 2 Tab
The Operand 2 tab lets you specify a constant value or a file or register con-
taining the second operand for the mathematical operation. The location of
Operand 2 is displayed near the bottom of the dialog.
Figure 47. Math Node: Operand 2 Tab
For more information on files and registers, refer to Registers on page 78 and
Files on page 81.
Result Tab
Register/File specifies where the result of the math operation is stored—in
either a field, register, or file. The location where the result of the mathemati-
cal operation is stored is displayed near the bottom of the dialog.
Figure 48. Math Node: Result Tab
For more information, refer to Using a Register as a Destination on page 79, and
Using a File as a Destination on page 83.
2342.book Page 71 Thursday, July 22, 2004 8:35 AM