Filter
Top Products
Creating & Using Nodes
60 PT Program Generator (PPG) v5.0
Store Info Tab
Data Destination specifies where to store the input data.
Figure 37. Input Node: Store Info Tab
To specify placement of the data in a register (refer to Using a Register as a Desti-
nation on page 79), select Register in the Data Destination pull-down list. To
store the data in one field of the register, select Field from the
Write Type
pull-down list. Specify or define a template, and select the field (refer to
Creat-
ing a Template on page 85).
To store the data in a file, select File from the
Data Destination pull-down
list, and select a file from the
File pull-down list. You can choose to insert the
data before a given record in the file, replace a given record, or insert the data
in alphabetic or numeric order (refer to
Files on page 81).
Output Nodes
Output nodes send data to the portable’s display, serial port, or system soft-
ware.
2342.book Page 60 Thursday, July 22, 2004 8:35 AM