Filter
Top Products
11 Maintenance and Diagnostics Settings
XPort Pro™ User Guide 97
4. Enter the MAC address to add to the ARP cache.
5. Click Add after supplying both fields.
Under Current State, select Remove All to remove all entries in the ARP
cache, or select Remove to remove a specific entry from the ARP cache.
IP Address Filter
The IP address filter specifies the hosts and subnets permitted to communicate with
the XPort Pro.
Note: If using DHCP/BOOTP, ensure the DHCP/BOOTP server is in this list.
To configure the IP address filter:
1. Click IP Address Filter on the menu bar. The IP Address Filter page opens to
display the current configuration.
Figure 11-7. IP Address Filter Configuration
2. Enter or modify the following settings:
IP Address Filter
Page Settings
Description
IP Address
Enter the IP address to add to the IP filter table.