Filter
Top Products
8 Services Settings
XPort Pro™ User Guide 65
Traps Enabled
Select On to enable the transmission of the SNMP
cold start trap messages. This trap is generated
during system boot.
Primary Trap Dest IP
Enter the primary SNMP trap host.
Secondary Trap Dest IP
Enter the secondary SNMP trap host.
3. Click Submit.
4. In the Current Configuration table, delete and clear currently stored settings as
necessary.
FTP Configuration
This page shows the current File Transfer Protocol (FTP) configuration and
connection status and various statistics about the FTP server.
To configure FTP:
1. Click FTP on the menu bar. The FTP page opens to display the current
configuration.
Figure 8-4. FTP Configuration
2. Enter or modify the following settings:
FTP Page Settings
Description
State Select Enabled to enable the FTP server.
Admin Username
Enter the username to use when logging in via FTP.
Admin Password
Enter the password to use when logging in via FTP.