Filter
Top Products
XPort Pro™ User Guide 13
2
2
.
.
I
I
n
n
t
t
r
r
o
o
d
d
u
u
c
c
t
t
i
i
o
o
n
n
The XPort Pro embedded Ethernet Device Server is a complete network-enabling
solution in a 13.50 (0.531) X 16.25 (0.640) X 33.90 (1.335) package. This miniature
device server empowers original equipment manufacturers (OEMs) to go to market
quickly and easily with Ethernet networking and web page serving capabilities built
into their products. [DIMS = mm (in.)]
Key Features
Power Supply: Regulated 3.3V input required. There is a step-down converter to
1.5 volts for the processor core. All voltages have LC filtering to minimize noises
and emissions.
Controller: A Lantronix DSTni-FX 32-bit microprocessor, running at 166 MHz
internal bus and 83 MHz external bus.
Memory: 16 MB Flash and 8 MB SDRAM. Please contact your sales
representative if you need larger memory sizes.
Ethernet: 10/100 Mbps Ethernet transceiver
Serial Ports: One full, RS232-supporting high-speed serial port with all hardware
handshaking signals. Baud rate is software selectable (300 bps to 921600 bps).
Note: The standard baud rate of 460800 bps is not supported.
Configurable IO Pins (CPs): Up to three pins are configurable as general purpose
I/Os if no DTR or DCD is used on serial ports. Not 5V tolerant.
Interface Signals: 3.3V-level interface signals.
Temperature Range: Operates over an extended temperature range of -40°C to
+85°C.
Applications
The XPort Pro device server connects serial devices such as those listed below to
Ethernet networks using the IP protocol family.
ATM machines
CNC controllers
Data collection devices