Filter
Top Products
15 VIP
XPort Pro™ User Guide 134
Importing the bootstrap file
To configure an XPort Pro to use VIP Access, import the bootstrap file as you would
any XML Configuration Record (XCR). For instructions on importing XCRs see
chapter 12,
Advanced Settings
Enabling VIP
Once the bootstrap file has been imported, VIP Access can be enabled and a conduit
with the DSM will be established. The VIP Statistics shows the current state of the
conduit. When configured correctly, a conduit with the DSM will be maintained at all
times.
Configuring Tunnels to Use VIP
Configuring Connect Mode tunnels to use VIP is a simple matter of configuring a
tunnel as is normally done, but also enabling VIP in the Tunnel Host settings, and
using a VIP Name for the address.
VIP Accept Mode tunnels do not require special configuration. If VIP access is
enabled (in the VIP configuration page), then VIP Accept Mode requests from a
ManageLinx device will be accepted.