Filter
Top Products
6 Line, Tunnel, Terminal, and Host Settings
XPort Pro™ User Guide 40
Packing Mode
When in Packing Mode, data is not transferred one byte at a time. Instead, data is
queued and sent in segments.
To configure the tunnel Packing Mode:
1. Select Tunnel 1 and Packing Mode at the top of the page. The Tunnel 1
Packing Mode page appears. Depending on the Mode selection, different
configurable parameters are presented to the user. The following figures show
the display for each of the three packing modes.
Figure 6-6a. Tunnel 1 Packing Mode (Mode = Disable)
Figure 6-7b. Tunnel 1 Packing Mode (Mode = Timeout)