Filter
Top Products
7 Configurable Pin Manager
XPort Pro™ User Guide 56
The Current Configuration table shows the current settings for each CP.
Current Configuration
CPM – CPs
Page Current
Configuration
Description
CP
Indicates the configurable pin number.
Pin #
Indicates the hardware pin number associated with the CP.
Configured As Shows the CP configuration. A CP configured as Input is set
to read input. A CP configured as Output drives data out of
the XPort Pro.
Value
Indicates the current status of the CP:
1 = asserted.
0 = de-asserted.
Inv = the CP is inverted.
Groups
Indicates the number of groups in which the CP is a member.
Active In Group
A CP can be a member of several groups. However, it may
only be active in one group. This field shows the group in
which the CP is active.
2. To display the CP status of a specific pin, click the CP number in the Current
Configuration table. The CP Status table shows the information about the CP.
CPM – CPs Page CP
Status
Description
Name
Shows the CP number.
State
Shows the current enable state of the CP.
Type
Indicates whether the CP is set for input or output.
Value
Shows the last bit in the CP current value.
Bit
Visual display of the 32 bit placeholders for a CP.
Level A “+” symbol indicates the CP is asserted (the voltage is
high). A “-“indicates the CP voltage is low.
I/O
Indicates the current status of the pin:
I = input
O = output
<blank> = unassigned
Logic An “I” indicates the CP is inverted.
Binary
Shows the assertion value of the corresponding bit.
CP#
Shows the CP number.
Groups
Lists the groups in which the CP is a member.
Note: To modify a CP, all groups in which it is a member must be disabled.