Filter
Top Products
9 Security Settings
XPort Pro™ User Guide 81
SSH Client:
Known Hosts
Page Settings
Description
Server
Enter the name or IP address of a known host. If you enter
a server name, the name should match the name of the
server used as the Remote Address in Connect mode
tunneling.
Public RSA Key
Enter the path and name of the existing public RSA key you
want to use with this known host or use the Browse button
to select the key.
Public DSA Key
Enter the path and name of the existing public DSA key you
want to use with this known host or use the Browse button
to select the key.
Note: These settings are not required for communication. They protect against Man-
In-The-Middle (MITM) attacks.
3. Click Submit.
In the Current Configuration table, delete currently stored settings as
necessary.
SSH Client User Configuration
On this page you can change SSH client settings for users.
SSH client known users are used by all applications that play the role of an SSH
client, specifically tunneling in Connect Mode. At the very least, a password or key
pair must be configured for a user. The keys for public key authentication can be
created elsewhere and uploaded to the device or automatically generated on the
device. If uploading existing keys, be sure the private key will not be compromised in
transit. This implies the data is uploaded over some kind of secure private network.
Note: If you are providing a key by uploading a file, make sure that the key is not
password protected.
To configure the SSH client users:
1. Click SSH on the menu bar and then SSH Client Users at the top of the page.
The SSH Client: Users page appears.