Filter
Top Products
6 Line, Tunnel, Terminal, and Host Settings
XPort Pro™ User Guide 36
Figure 6-3. Line 1 Command Mode
2. Enter or modify the following settings:
Line –
Command Mode
Page Settings
Description
Mode
Select the method of enabling Command Mode or choose to
disable Command Mode.
Always = immediately enables Command Mode for the serial
line.
Use Serial String = enables Command Mode when the serial
string is read on the serial line during boot time.
Use CP Group = enables Command Mode based on the
status of a CP Group. When the value matches the current
value of the group, Command Mode is enabled on the serial
line.
Use both Serial String and CP Group = the serial string and