Filter
Top Products
11 Maintenance and Diagnostics Settings
XPort Pro™ User Guide 93
File system Browser
Page Settings
Description
Create
File
Enter the name of the file you want to create, and
then click Create.
Directory
Enter the name of the directory you want to create,
and then click Create.
Upload File
Enter the path and name of the file you want to
upload by means of HTTP(S) or use the Browse
button to select the file, and then click Upload.
Copy File
Source
Enter the location where the file you want to copy
resides.
Destination
Enter the location where you want the file copied.
After you specify a source and destination, click
Copy to copy the file.
Move
Source
Enter the location where the file you want to move
resides.
Destination
Enter the location where you want the file moved.
After you specify a source and destination, click
Move to move the file.
TFTP
Action
Select the action that is to be performed via TFTP:
Get = a “get” command will be executed to store a
file locally.
Put = a “put” command will be executed to send a
file to a remote location.
Mode
Select a TFTP mode to use. Choices are:
ASCII
Binary
Local File
Enter the name of the local file on which the
specified “get” or “put” action is to be performed.
Remote File
Enter the name of the file at the remote location that
is to be stored locally (“get’) or externally (“put”).
Host
Enter the IP address or name of the host involved in
this operation.
Port
Enter the number of the port involved in TFTP
operations.
Click Transfer to perform the TFTP transfer.