Filter
Top Products
6 Line, Tunnel, Terminal, and Host Settings
XPort Pro™ User Guide 41
Figure 6-8c. Tunnel 1 Packing Mode (Mode = Send Character)
2. Enter or modify the following settings:
Tunnel - Packing
Mode Page
Settings
Description
Mode Select Disable to disable Packing Mode completely.
Select Timeout to send data after the specified time
has elapsed. Select Send Character to send the
queued data when the send character is received.
Threshold
(Appears for both
Timeout and Send
Character Modes)
Send the queued data when the number of queued
bytes reaches the threshold.
Timeout
(Appears for
Timeout Mode)
Enter a time, in milliseconds, for the XPort Pro to
send the queued data after the first character was
received.
Send Character
(Appears for Send
Character Mode)
Enter the send character. Upon receiving this
character, the XPort Pro sends out the queued data.
Trailing Character
(Appears for Send
Character Mode)
Enter the trailing character. This character is sent
immediately following the send character.
3. Click Submit.