Filter
Top Products
7 Configurable Pin Manager
XPort Pro™ User Guide 57
To change a CP output value:
1. Select the CP from the drop-down list.
2. Enter the CP value.
3. Click Submit.
To change a CP configuration:
1. Select the CP from the drop-down list.
2. Select the CP configuration from the drop-down list.
3. (If necessary) Select the Assert Low checkbox.
4. Click Submit.
Note: These changes to a CP are not saved in FLASH. Instead, these CP settings
are used when the CP is added to a CP Group. When the CP Group is saved, its CP
settings are saved with it. Thus, a particular CP may be defined as “Input” in one
group but as “Output” in another. Only one group containing any particular CP may
be enabled at once.