Filter
Top Products
11 Maintenance and Diagnostics Settings
XPort Pro™ User Guide 94
Protocol Stack Configuration
To configure the XPort Pro network stack protocols:
1. Click Protocol Stack on the menu bar. The Protocol page appears with links to
the TCP, IP, ICMP, and ARP protocols.
2. Click on one of the protocol names to see the details of the settings for that
protocol.
TCP Settings
Figure 11-3. TCP Protocol Page
On the TCP page, you may modify the following settings:
Send RSTs:
TCP contains six control bits, with one or more defined in each packet. RST is one of
the control bits. The RST bit is responsible for telling the receiving TCP stack to end
a connection immediately.
Select Enabled to enable the sending of the RST flag.
CAUTION: Setting this flag may pose a security risk.
Select Disabled to disable the sending of the RST flag.
Ack Limit: