Filter
Top Products
6 Line, Tunnel, Terminal, and Host Settings
XPort Pro™ User Guide 42
Accept Mode
In Accept Mode, the XPort Pro listens (waits) for incoming connections.
To configure the tunnel’s Accept Mode:
1. Click Tunnel 1 and Accept Mode at the top of the page. The Tunnel 1 Accept
Mode page appears.
Figure 6-9. Tunnel 1 Accept Mode
2. Enter or modify the following settings:
Tunnel -
Accept Mode
Page Settings
Description
Mode
Select the method used to start a tunnel in Accept mode.
Choices are:
Disabled = do not accept an incoming connection.
Always = accept an incoming connection. (default)
Any Character = start waiting for an incoming connection
when any character is read on the serial line.
Start Character = start waiting for an incoming connection
when the start character for the selected tunnel is read on the
serial line.