Filter
Top Products
6 Line, Tunnel, Terminal, and Host Settings
XPort Pro™ User Guide 39
Figure 6-5. Tunnel 1 Serial Settings
2. View or modify the following settings:
Tunnel Serial
Settings Page
Settings
Description
Line Settings
(display only)
Current serial settings for the line.
Protocol
(display only)
The protocol being used on the line. In this case,
Tunnel.
Buffer Size
Enter the buffer size used for the tunneling of serial
data received. Requires reboot to take effect.
DTR
Select when to assert DTR.
TruPort = asserted whenever either a connect or an
accept mode tunnel connection is active with the Telnet
Protocol RFC2217 saying that the remote DSR is
asserted.
Asserted while connected = asserted whenever
either a connect or an accept mode tunnel connection
is active.
Continuously asserted = asserted regardless of the
status of a tunnel connection.
3. Click Submit.