Filter
Top Products
6 Line, Tunnel, Terminal, and Host Settings
XPort Pro™ User Guide 54
Host Configuration
This page shows current settings for a remote host and lets you change these
settings.
1. Click Host on the menu and then click the desired host at the top of the page.
Configuration is automatically selected. (Host 1 is the default.) Host Configuration
page appears.
Figure 6-17. Host Configuration
2. Enter or modify the following settings:
Host Page
Host Page
Settings
Description
Name
Enter a name for the host. This name appears on the Login
Connect Menu. To leave a host out of the menu, leave this field
blank.
Protocol
Select the protocol to use to connect to the host. Choices are:
Telnet
SSH
Note: SSH keys must be loaded or created on the SSH page for
the SSH protocol to work.
SSH
Username
Appears if you selected SSH as the protocol. Enter a username to
select a pre-configured Username/Password/Key (configured on
the SSH: Client Users page), or leave it blank to be prompted for
a username and password at connect time.
Remote
Address
Enter an IP address for the host to which the XPort will connect.
Remote
Port
Enter the port on the host to which the XPort will connect.
3. To save changes, click Submit.