Filter
Top Products
6 Line, Tunnel, Terminal, and Host Settings
XPort Pro™ User Guide 34
Line 1 Configuration
This page shows the configuration settings for the serial line selected at the top of the
page and lets you change the settings for that serial line.
To configure Line 1:
1. Click Line 1 and Configuration at the top of the page. The Line 1 Configuration
page appears.
Figure 6-2. Line 1 Configuration
2. Enter or modify the following settings:
Line -
Configuration
Page Settings
Description
Name
Enter a name for the line. The default Name is blank.
Interface
Select the interface type from the drop-down menu. The
default is RS232.
State
Indicates whether the current line is enabled. To change the
status, select Enabled or Disabled from the drop-down
menu.