Filter
Top Products
6 Line, Tunnel, Terminal, and Host Settings
XPort Pro™ User Guide 45
2. Enter or modify the following settings:
Tunnel –
Connect Mode
Page Settings
Description
Mode
Select the method to be used to attempt a connection to
a remote host or device. Choices are:
Always = a connection is attempted until one is made. If
the connection gets disconnected, the XPort Pro retries
until it makes a connection. (default)
Disable = an outgoing connection is never attempted.
Any Character = a connection is attempted when any
character is read on the serial line.
Start Character = a connection is attempted when the
start character for the selected tunnel is read on the
serial line.
Modem Control Asserted = a connection is attempted
as long as the Modem Control pin (DSR) is asserted,
until a connection is made.
Modem Emulation = a connection is attempted when
triggered by modem emulation AT commands.
Local Port
Enter the port for use as the local port. A random port is
selected by default. Once you have configured a
number, click the Random link in the Current
Configuration to switch back to random.
Host Click <None> in the Host field to configure the Host
parameters.
VIP = Enabling the VIP directs the tunnel to connect to a
remote Lantronix Virtual IP identified by the VIP Name.
Default is Disabled.
VIP Name = Displays configured VIP name, used only if
VIP is enabled.
Address = Displays configured IP address or DNS
address, used only if VIP is disabled.
Port = Displays configured Port.
Protocol = Select the protocol type for use with Connect
Mode. The default protocol is TCP. If you select TCP
AES you will need to configure the AES keys.
SSH Username = Displays configured username, used
only if SSH protocol is selected.
TCP Keep Alive = Default is 45000 milliseconds.
AES Encrypt/Decrypt Key = Displays presence of key,
used only if protocol with AES is selected.
Reconnect Timer
Enter the reconnect time in milliseconds. The XPort Pro
attempts to reconnect after this amount of time after
failing a connection or exiting an existing connection.