Filter
Top Products
11 Maintenance and Diagnostics Settings
XPort Pro™ User Guide 96
ICMP Settings
Figure 11-5. ICMP Protocol Page
1. On the ICMP Protocol page, choose Enabled or Disabled.
2. Click Submit after changing the selection.
ARP Settings
Figure 11-6. ARP Protocol Page
1. On the ARP Protocol page, enter the time, in hours, minutes and seconds, for the
ARP timeout. This is the maximum duration an address remains in the cache.
2. Click Submit after changing the desired fields.
Note: Both the IP and MAC addresses are required for the ARP cache.
3. Enter the IP address to add to the ARP cache.