Filter
Top Products
7 Configurable Pin Manager
XPort Pro™ User Guide 59
2. The Current Configuration table shows the current settings for each CP group.
Current Configuration
CPM – Groups Page
Current
Configuration
Description
Group Name
Shows the CP group’s name.
State
Indicates whether the group is enabled or disabled.
CP Info
Provides CP group information.
To display the status of a specific group
Click the CP group name in the Current Configuration table.
Group Status
CPM – Groups Page
Group Status
Description
Name
Shows the CP Group name.
State
Current enable state of the CP group.
Value
Shows the CP group’s current value.
Bit
Visual display of the 7 bit placeholders for a CP.
Level A “+” symbol indicates the CP’s bit position is asserted
(the voltage is high). A “-“ indicates the CP voltage is
low.
I/O
Indicates the current status of the pin:
I = input
O = output
<blank> = unassigned
Logic An “I” indicates the CP output is inverted.
Binary
Shows the assertion value of the corresponding bit.
X = group is disabled or bit is unassigned in group
CP#
Shows the configurable pin number and its bit position
in the CP group.
To create a CP group:
1. Enter a group name in the Create Group field.
2. Click Submit.