Filter
Top Products
11 Maintenance and Diagnostics Settings
XPort Pro™ User Guide 108
System Configuration
The XPort Pro System page allows for rebooting the device, restoring factory
defaults, uploading new firmware, configuring the short and long name, and viewing
the current system configuration.
Figure 11-18. System
To configure the XPort Pro system settings:
1. Click System on the menu bar. The System page opens.
2. Configure the following settings:
System Page
Settings
Description
Reboot Device Click Reboot to reboot the XPort Pro. The system refreshes
and redirects the browser to the XPort Pro home page.
Restore Factory Defaults Click Factory Defaults to restore the XPort Pro to the original
factory settings. All configurations will be lost. The XPort Pro
automatically reboots upon setting back to the defaults.
Upload New Firmware Click Browse to locate the firmware file location. Click Upload
to install the firmware on the XPort Pro. The device
automatically reboots upon the installation of new firmware.
Name Enter a new Short Name and a Long Name (if necessary).
The Short Name maximum is 32 characters. The Long Name