Filter
Top Products
6 Line, Tunnel, Terminal, and Host Settings
XPort Pro™ User Guide 51
Connect String
Enter the connect string. This modem initialization string
prepares the modem for communications. It is a
customized string sent with the “CONNECT” modem
response code.
Display Remote IP
Selects whether the incoming RING sent on the Serial
Line is followed by the IP address of the caller. Default
is Disabled.
3. Click Submit.
Terminal Settings
This page shows configuration settings for attaching a terminal on a serial line or the
network and lets you change them as necessary.
Line Terminal Configuration
To configure a line to support an attached terminal:
1. Click Terminal on the menu and then select the line that is connected to the
terminal you want to configure. The default is Line 1. Configuration is
automatically selected. The Terminal on Line 1 Configuration page appears.
Figure 6-15. Terminal on Line 1 Configuration
2. Enter or modify the following settings: