Filter
Top Products
Secure communication
59
4 Click Apply.
5 Click OK.
Setting communication security for devices
The two tasks that control communication security for devices are the Communication Password
task and the Printer Lockdown task. The Communication Password task lets the user synchronize
the communication password of one or more devices with a new or existing server or lets the user
remove the communication password from one or more devices. In order for secure communication
to take place the server and device must use the same communication password. Synchronizing a
device password sets the communication password for the device to the same password that is used
by the server.
The Printer Lockdown task lets a user force one or more supported devices to communicate
exclusively over a secure channel.
Before either the Communication Password task or the Printer Lockdown task may be implemented,
a server communication security password must first be set. If a user attempts to access one of
these tasks before a server communication password has been set, the user will be prompted to set
a password before the task will open.
Using the Communication Password task
1 From the MarkVision Professional Home Screen, go to Settings Æ Security Æ
Communication Password or select Communication Password from the All Tasks list.
2 Select the devices that you want to establish a password for using either the Quick Find or
Folders tab in the Find Results window. You can use Ctrl + click to select multiple devices.
Note: Devices that are not capable of secure communication are displayed with a red
circle and slash over the device icon in the Find Results window.
To synchronize the device communication password with the MarkVision Server:
1 Click the Synchronize with Server button.
2 Click Yes.
To synchronize the device communication password with a new server password:
1 Click the Synchronize with Server button.
2 Click the I want to change the communication password of the server before
synchronizing check box.
3 Click Yes.
4 Enter the new server communication password.
5 Click OK.