Lexmark 11 Patio Umbrella User Manual


 
Secure communication
57
The degree of security with which the devices and the server communicate over the network is then
determined by the security level that has been set on the MarkVision Server in conjunction with the
communication security that has been applied to the device.
Note: Secure communication is limited to configuration commands between the host
computer and the device, not for printing.
Setting server communication security
There are two elements of server communication security: establishing a communication security
password for the server and setting the server communication security level. The server
communication security password can be set in the MarkVision Setup wizard or through the
Administrative Settings task. The server communication security level is set exclusively through the
Administrative Settings task. The default server security level is Low.
Setting the server communication security password
If using the MarkVision Setup Wizard:
1 The MarkVision Setup Wizard appears when the application opens. If the setup wizard does
not appear, go to MarkVision
Æ MarkVision Setup from the MarkVision Home Screen or
select MarkVision Setup from the All Tasks list.
2 Proceed through the MarkVision Setup Wizard to Step 6: Secure Communication.
Note: It is not necessary to complete each step of the setup wizard. To go directly to
secure communication setup, click Step 6 at the top of the wizard.
3 Enter a server communication password.
4 Confirm the password.
5 Click OK.
If using the Administrative Settings task:
1 Go to MarkVision Æ Administrative Settings or select Administrative Settings from the
All Tasks list.
2 Select the Communication Security tab at the top of the dialog.
3 Click the Communication Password button.
4 If the server has an existing password, enter the password in the Current Password field.
5 Enter the new password.
6 Confirm the new password.
7 Click OK.