Filter
Top Products
500 Commands summary
vxassist -b [-g diskgroup] make \
volume length layout=mirror \
mirror=ctlr [attributes]
Creates a volume with mirrored data
plexes on separate controllers.
See “Mirroring across targets,
controllers or enclosures” on
page 255.
Example:
# vxassist -b -g mydg make \
mymcvol 20g layout=mirror \
mirror=ctlr
vxmake -b [-g diskgroup] -Uusage_type \
vol volume [len=length] plex=plex,...
Creates a volume from existing plexes.
See “Creating a volume using vxmake”
on page 258.
Example:
# vxmake -g mydg -Uraid5 \
vol r5vol \
plex=raidplex,raidlog1,\
raidlog2
vxvol [-g diskgroup] start volume Initializes and starts a volume for use.
See “Initializing and starting a
volume” on page 260.
See “Starting a volume” on page 271.
Example:
# vxvol -g mydg start r5vol
vxvol [-g diskgroup] init zero volume Initializes and zeros out a volume for
use.
See “Initializing and starting a
volume” on page 260.
Example:
# vxvol -g mydg init zero \
myvol
Table A-6 Creating volumes
Command Description