488 Commands summary
other commands and scripts, and which are not intended for general use, are not
located in /opt/VRTS/bin and do not have manual pages.
The following tables summarize the commonly-used commands:
■ “Obtaining information about objects in VxVM” on page 488
■ “Administering disks” on page 489
■ “Creating and administering disk groups” on page 492
■ “Creating and administering subdisks” on page 494
■ “Creating and administering plexes” on page 496
■ “Creating volumes” on page 498
■ “Administering volumes” on page 501
■ “Monitoring and controlling tasks” on page 505
Table A-1 Obtaining information about objects in VxVM
Command Description
vxdctl license List licensed features of VxVM.
vxdisk [-g diskgroup] list [diskname] Lists disks under control of VxVM.
See “Displaying disk information” on
page 120.
Example:
# vxdisk -g mydg list
vxdg list [diskgroup] Lists information about disk groups.
See “Displaying disk group
information” on page 169.
Example:
# vxdg list mydg
vxdg -s list Lists information about shared disk
groups.
See “Listing shared disk groups” on
page 421.
Example:
# vxdg -s list