Filter
Top Products
490 Commands summary
vxdiskadd [devicename ...] Adds a disk specified by device name.
See “Using vxdiskadd to place a disk
under control of VxVM” on page 101.
Example:
# vxdiskadd c0t1d0
vxedit [-g diskgroup] rename olddisk \
newdisk
Renames a disk under control of
VxVM.
See “Renaming a disk” on page 119.
Example:
# vxedit -g mydg rename \
mydg03 mydg02
vxedit [-g diskgroup] set \
reserve=on|off diskname
Sets aside/does not set aside a disk
from use in a disk group.
See “Reserving disks” on page 119.
Examples:
# vxedit -g mydg set \
reserve=on mydg02
# vxedit -g mydg set \
reserve=off mydg02
vxedit [-g diskgroup] set \
nohotuse=on|off diskname
Does not/does allow free space on a
disk to be used for hot-relocation.
See “Excluding a disk from hot-
relocation use” on page 388.
See “Making a disk available for hot-
relocation use” on page 389.
Examples:
# vxedit -g mydg set \
nohotuse=on mydg03
# vxedit -g mydg set \
nohotuse=off mydg03
Table A-2 Administering disks
Command Description