Filter
Top Products
94
MU128 Guided Tour
Adjusting the Overall Tone — Multi EQ
The Multi EQ section gives you five-band control (at specific frequencies)
over the entire sound of the MU128. Special presets are also available for
instantly changing the tone to suit different types of music.
Operation
1 Call up the “EQ TYPE” parameter and select the desired EQ pre-
set.
First press the [EQ] button, then use the [SELECT </>] buttons
to select the parameter. Then use the [VALUE -/+] buttons or
data dial to select the desired preset.
2 If desired, change the values of the five different bands.
Use the [SELECT </>] buttons to select the parameter, then
change the value with the [VALUE -/+] buttons or data dial.
The changes you make to a selected EQ preset are maintained even
when the power is turned off. However, selecting another preset au-
tomatically cancels your original settings.
For more information on the Equalizer effects, see page 155. Also,
refer to the Multi Mode Equalizer Lock parameter (page 158).
Equalizer (EQ)