Filter
Top Products
MU128 Utility Mode
161
English
System Functions (SYSTEM)
Display Bank Select (DispBankSel)
Settings: 1 (displays only banks with
unique Voices),
2 (displays all banks)
This determines whether the MU128 dis-
plays all Voice banks or not when chang-
ing banks. (For information on changing
banks, see page 43.) When this is set to
“1,” the MU128 conveniently skips over
banks that have the same Voice. In other
words, when you step through the avail-
able banks, the display stops only on
banks for which the Voice is unique or
different (for the selected program num-
ber). If “2” is selected, all banks are dis-
played in succession, regardless of
whether the Voices are the same or not.
The Display Bank Select setting itself
cannot be changed by incoming MIDI
messages.
Voice Map (Map)
Settings: MU basic, MU100Native
This determines the Voice configuration
or assignment for the XG Voice set of the
MU128 and is designed for setting com-
patibility with various song data.
The MU Basic Voice map maintains com-
patibility with the widest range of XG
tone generators. If you are using song
data recorded on older XG tone genera-
tors, you should use this setting.
The MU100 Native Voice map (selected
as the default at the factory) includes the
upgraded Voices and Voices utilizing new
waveforms and samples not included on
older XG tone generators.
These two Voice maps have the same or-
der and number of the Voices. However,
the actual sounds and overall balance may
differ for each map when playing back
identical song data, since the actual char-
acter of some of the Voices differs greatly.
When playing back song data created on
or for other XG tone generators, try
switching between the two different maps
to achieve the optimum playback condi-
tion for the song.
NOTES
• Only the Voice map of the basic Voice bank
(MSB = 0, LSB = 0) is affected by this pa-
rameter. The other variation Voice banks
are not affected.
• This setting is not affected by incoming XG
System On or GM System On MIDI mes-
sages.