Filter
Top Products
138
MU128 Performance Mode
Performance Edit Mode
Performance Name
Performance Name (Perform Name)
This allows you to give a name to your
edited Performance.
Operation
1 From the Performance Name dis-
play, press the ENTER button.
2 Use the SELECT </> buttons to
select the character position
(flashing character) in the name
and use the VALUE -/+ buttons
or data dial to change the charac-
ter at that position.
TONE GENERATOR
XG
TG
300
B
PERFORM
MODE EQ
UTILEFFECT
PLAY EDIT
ALL
MUTE/
SOLO
PART
PART
SELECT
VALUE
SELECT
VALUE
ENTER
EXIT
PART VOL EXPPAN
BANK/PGM
REVCHO VARKEY
Up to 12 characters can be used
for the Performance name. Avail-
able characters include all letters
of the alphabet, in both upper and
lower case, numbers from 0 to 9,
and a variety of miscellaneous
characters.
Performance name
Use these to change character at selected position.
3 Press the EXIT button to return to
the previous display (or press the
PLAY button to return to the Play
display).
After creating and naming a Per-
formance, you’ll probably want to
save that Performance for future
recall. For instructions on saving a
Performance, refer to the Store op-
eration on page 143.
Portamento Parameters
Portamento Switch (PortamnSw)
Same as the corresponding parameter in
the Multi Edit mode. (page 121.)
Portamento Time (PortamnTm)
Same as the corresponding parameter in
the Multi Edit mode. (page 121.)
Modulation Wheel Parameters
Modulation Wheel — LFO Pitch
Modulation Depth (MW LFOPMod)
Same as the corresponding parameter in
the Multi Edit mode. (page 124.)
Use these to move among character positions.