Filter
Top Products
MU128 Guided Tour
53
English
When Sound Module mode is set to "TG300B"
Normal Voices BankSelect MSB BankSelect LSB
0~41
126, 127
BankSelect MSB BankSelect LSB
GM Voice set and variation set of Voices
C/M Voices*
Drum Voices
Drum Kits
* The C/M Voice set is included to provide multi-timbral compatibility for
computer music systems and song data that predate the GM System Level 1
standard.
Part Mode
The Part mode is used to determine whether the selected Part uses Normal
Voices or Drum Voices. It also lets you select a particular drum setup for
editing the Drum Voice. This is done in the Multi Part Edit mode (page
120).
Normal mode and Drum mode
The Part mode features two settings: Normal mode and Drum mode.
In the Normal mode (“normal”), Normal Voices can be selected.
In the Drum mode (“drum,” “drumS1 - S4”), Drum Voices can be selected.
NOTES
• When the Sound Module mode is set to “PFM,” the Part mode is fixed to normal
and cannot be changed. (The Part Mode parameter is not displayed.)
• When using the Voice Category buttons to select Drum and Normal Voices, the
Part mode is automatically changed to the appropriate mode. Pressing one of the
Voice Category buttons [Piano] - [Model excl.] automatically sets the Part mode
to Normal, and pressing the [Drum] button automatically sets the Part mode to
Drum (“drum,” “drumS1 - S4”).
About Drum Setups
The Drum Voice cannot be edited directly on the MU128. First, assign one
of the drum setups to a Part, then edit the selected setup. Editing of drum
setups is done in the Multi Part Edit mode (page 126).
The MU128 has four internal drum setups (“drumS1 - S4”), and each can
be assigned to different Parts and have different settings for the drum sounds.
However, if the same drum setup is selected simultaneously for more than
one Part, editing the drum setup in one Part will automatically change all the
other Parts to which the same drum setup is assigned.
By setting the Part mode to “drum” for more than one Part, you can have
different Drum Voices assigned to each of these Parts. However, the Drum
Voices for Parts set to “drum” cannot be edited.
About the Parts and Voices of the MU128