Filter
Top Products
MU128 Appendix
185
English
Error Messages
Error Messages
Battery Low!
The battery voltage (for internal memory backup) may be too low. Bring the unit to
your local Yamaha dealer or any other authorized Yamaha service personnel.
Illegal Data!
A data error resulted during reception of MIDI messages. Try transmitting the data
again, or turn the MU128 off and back on again.
MIDI Buffer Full!
Too much MIDI data is being received by the MU128 at one time. Reduce the amount
of data being sent to the MU128.
HOST is Offline!
This message appears when the host computer is not turned on, the connecting cable
is not properly connected, or the sequencing software is not active.
SysEx Adrs ERROR!
The data of the received System Exclusive message is incorrect. Check the address
of the message and try transmitting again.
SysEx Data ERROR!
The data of the received System Exclusive message is incorrect. Check the data of
the message (as to whether it requires an MSB or LSB header) and try transmitting
again.
SysEx Size ERROR!
The data of the received System Exclusive message is incorrect. Check the size of
the message and try transmitting again.
Check Sum ERROR!
The checksum of the received System Exclusive message is incorrect. Check the
checksum of the message and try transmitting again.
This Parameter Isn’t Excl Data
The selected parameter has no System Exclusive value and cannot be displayed with
the Show MIDI Data function.
No Parameter
The selected parameter cannot be displayed with the Show MIDI Data function.
Rcv CH Is OFF!
The selected parameter for use with the Show MIDI Data function cannot be con-
verted to a MIDI message value since the Receive Channel for the Part is off. Set the
Receive Channel to an appropriate value.