Filter
Top Products
64
MU128 Guided Tour
a Adjust the value while listening to the sound.
Try setting this to around “+30” and play the keyboard. Notice
how the attack of the sound has become slower.
b Select and adjust the “Release Time” parameter.
Use the [SELECT </>] buttons, then set this to around “+50.”
Play some notes on the keyboard and release them. Notice how the
sound sustains after you release each key.
Details
The effect of the EG parameters differs depending on the selected Voice. (For more
information on the EG parameters, see page 113.)
On Your Own...
While you’re at it, try making changes to some of the other Edit parameters.
The procedure is the same:
1) Select the desired Part with the [PART -/+] buttons.
2) Call up the Edit menus by pressing the [EDIT] button.
3) Select the desired menu with the [SELECT </>] buttons, and press
[ENTER].
4) Select the desired parameter with the [SELECT </>] buttons, and
change the value with the [VALUE -/+] buttons or data dial.
5) Use the [EXIT] button as needed to return to the Edit menu.
Hint
You can select different Parts (by using the
[PART -/+]
buttons) at any point in the
editing session, no matter which Edit menu or parameter is selected. This lets you
quickly shuttle among the various parts and effectively edit the desired parameters.
The selected Part is always indicated at the bottom left of the display.
For more information on the specific Edit parameters, see page 111.
Editing in the Multi Mode