Filter
Top Products
114
MU128 Multi Mode
Level/Filter EG Parameters
EG Attack Time
Range: –64 — +63
This determines the Attack Time of the
EG, or how long it takes for the sound to
reach full volume when a note is played.
For the Filter, this determines how long
it takes for the sound to be affected by
the maximum Filter values.
EG Decay Time
Range: –64 — +63
This determines the Decay Time of the
EG, or how rapidly the sound dies out as
a note is held. For the Filter, this deter-
mines how long it takes for the Filter ef-
fect to die out.
EG Release Time
Range: –64 — +63
This determines the Release Time of the
EG, or how long the sound sustains after
a note is released. For the Filter, this de-
termines how long the Filter effect con-
tinues after a note is released.
Pitch EG Parameters
The Pitch EG parameters determine how
the pitch of a Part’s Voice changes over
time. This lets you produce subtle or pro-
nounced pitch changes as a note is played.
In the example Pitch EG settings below,
a played note is gradually bent up to its
normal pitch, and kept there as the note
is held. When the note is released, the
pitch rapidly climbs up.
Normal
Pitch
Time
Key is released
Low
High
NOTE
The Pitch EG parameters may have little or
no effect, depending on the particular Voice
used and the settings made to the main EG
parameters.
Pitch EG Initial Level (PEGInitLvl)
Range: –64 — +63
This determines the initial pitch of the Part’s
Voice, when the note is first played. A set-
ting of 00 corresponds to normal pitch.
Multi Edit Mode