Filter
Top Products
116
MU128 Multi Mode
Multi Edit Mode
EQ Low Frequency (Low Freq)
Range: 32 Hz — 2.0 kHz
This determines the frequency which is
boosted or cut (in the Low Gain param-
eter below) for each Part.
EQ Low Gain
Range: –64 — +00 — +63
This determines the level of the selected
frequency (in “Low Freq” above). Posi-
tive values boost the level of the selected
frequency and negative values attenuate
it.
EQ High Frequency (High Freq)
Range: 500 Hz — 16 kHz
This determines the frequency which is
boosted or cut (in the High Gain param-
eter below) for each Part.
EQ High Gain
Range: –64 — +00 — +63
This determines the level of the selected
frequency (in “High Freq” above). Posi-
tive values boost the level of the selected
frequency and negative values attenuate
it.
Equalizer (Part EQ)
NOTE
This menu is not available when the Drum Part is selected. However, the Drum
Part EQ can be set for each of the individual parts in the Drum Setup Controls
(page 129).
Path: [EDIT] button → “EQ”
EQ (Equalizer) ____________________________________________
●
EQ Low Frequency
●
EQ Low Gain
●
EQ High Frequency
●
EQ High Gain
The Part EQ parameters let you adjust and set the tonal quality of an
individual Part’s Voice, such as boosting the bass sound, or making it
brighter. This is a two-band equalizer with wide frequency variation for
each band, and is independent of the overall EQ controls (page 155).