Filter
Top Products
MU128 Effect Edit Mode
153
English
When Variation is set to System:
NOTES
• The Parts to which Insertion 1, 2 are applied is determined by the Part parameter in the Insertion section (page 151).
• Even though the System routing applies the selected effect to all Parts, you can control how much the Reverb, Chorus and Variation effects are
applied to any individual Part (with the Reverb Send, Chorus Send and Variation Send parameters in the Single Part controls; see pages 107, 108,
127, 128, 135, 136). For the effects to be properly heard, the Reverb Return, Chorus Return and Variation Return parameters in the All Part
controls must also be set to appropriate values (pages 109, 110,133).
• The stereo position of the effects is controlled by the Reverb Pan, Chorus Pan and Variation Pan parameters; see pages 147, 148, 150.
• You can set Reverb, Chorus and Variation to be routed in parallel or in serial, and you can determine the amount of Variation effect that is sent
to Chorus and Reverb, as well as the amount of Chorus that is sent to Reverb. This is done with the Send Variation to Chorus (page 150), Send
Variation to Reverb (page 150), and Send Chorus to Reverb (page 148) parameters. When these are all set to 0, all three effects are in parallel
routing. Higher values for each provide varying degrees of serial routing.
About the Effect Connections — System and Insertion
INS2
rev send
cho send
var send
insertion 2 on/off
dry level
VARIATION
REVERB
send chorus to reverb
send variation to chorus
send variation to reverb
DRY LINE
PAN
reverb pan
PAN
chorus pan
PAN
variation pan
OUT
Thick line indicates stereo signal.
EQ
Insertion 2 can be
applied to only one
Part at a time.
CHORUS
VARIATION CONNECTION = SYSTEM
insertion 2 part
INS2
rev send
cho send
var send
insertion 2 on/off
dry level
INS2
rev send
cho send
var send
insertion 2 on/off
dry level
INS2
rev send
cho send
var send
insertion 2 on/off
dry level
INS1
insertion 1 on/off
Part A1
Insertion 1 can be
applied to only one
Part at a time.
insertion 1 part
INS1
insertion 1 on/off
INS1
insertion 1 on/off
INS1
insertion 1 on/off
Part A2
Part 1
Part 64
reverb return
chorus return
variation return