Filter
Top Products
182
MU128 Plug-in System
7 When the power to the MU128 is turned on again, the board is
automatically installed and ready for operation. The appropriate
LEDs on the front panel (PLG-1 - 3) light to indicate the installed
XG Plug-in boards.
For tone generator type XG Plug-in boards, you can select the
desired board (PLG-1 - 3) by pressing the [SELECT] button. (The
Part Assign parameter must be set and the assigned Part must be
selected first; see page 176.) The icon of the selected board is
shown in the display and the corresponding LED at the bottom
flashes.
NOTE
In order to use the Voices of an XG Plug-in board (tone generator type), you must
first set the Part Assign parameter to assign the board to a Part. (page 177.)
About Plug-in System
TONE GENERATOR
XG
TG
300
B
PERFORM
MODE EQ
UTIL EFFECT
PLAY EDIT
ALL
MUTE/
SOLO
PART
PART
SELECT
VALUE
SELECT
VALUE
ENTER
EXIT
SELECT
PART GROUP
StringsBassGuitarOrgan
Chrom.perc.
Piano
Ensemble Brass Reed Pipe Synth lead Synth pad
DrumModel excl.SFXPercussiveEthnic
Synth effects
PHONESMIDI IN A
STAND BY
ON
VOLUME
2
PART VOL EXPPAN
BANK/PGM
REV CHOVAR KEY
A/D INPUT
1
MU PLG-1 PLG-2 PLG-3