Filter
Top Products
110
MU128 Multi Mode
Variation Return (VarRtn)
Range: 000 — 127
This determines the amount of Variation
return in the overall mix. Variation Re-
turn is only available when the Variation
Connection parameter is set to SYS. (See
page 150.)
NOTES
• Keep in mind that the amount of the Varia-
tion effect also depends on the Variation
Send setting in the Single Part controls (page
108).
• When the Variation Connection parameter
(page 150) is set to “INS,” [***] is shown in
the display to indicate that this parameter
cannot be set. (Keep in mind that Varia-
tion Connection is set to “INS” as the fac-
tory default.)
Transpose (Trans)
Range: –24 — +24 semitones
This determines the overall Transpose
setting of the Parts.
NOTE
This parameter has no effect for Parts set to
the Drum mode, or for the A/D Parts.
Part Controls