Filter
Top Products
MU128 Performance Mode
135
English
Program (Voice) Number
Range:
01 — 04 part: 001 — 128
A/D1 part: 001 — 013
A/D2 part: 001 — 005
This determines the Voice for the selected
Part. (Refer to the SOUND LIST &
MIDI DATA booklet.)
NOTE
Drum Voices are not available in the Perfor-
mance mode.
Volume
Range: 000 — 127
This determines the Volume setting for
the selected Part’s Voice.
Pan
Settings: Rnd (Random), L63 — C —
R63
This determines the stereo position of the
selected Part’s Voice. A setting of “Rnd”
(Random) randomly assigns the Voice to a
pan position. This is useful when you want
to have different Voices sound from differ-
ent random parts of the stereo image.
Performance Part Control
NOTE
The Random setting has no effect on Parts to
which Insertion effects have been assigned.
Random is also unavailable for the A/D1 and
A/D2 Parts.
Reverb Send (RevSend)
Range: 000 — 127
This determines the level of the selected
Part’s Voice that is sent to the Reverb ef-
fect. A value of 000 results in a com-
pletely “dry” Voice sound.
NOTES
• Keep in mind that the Reverb effect must
be properly enabled and set for this param-
eter to work as intended. (See page 88.)
• Also keep in mind that the overall Reverb
effect depends on the Reverb Return set-
ting in the All Part controls (page 133).
Chorus Send (ChoSend)
Range: 000 — 127
This determines the level of the selected
Part’s Voice that is sent to the Chorus ef-
fect. A value of 000 results in a completely
“dry” Voice sound (no Chorus effect).
NOTES
• Keep in mind that the Chorus effect must
be properly enabled and set for this param-
eter to work as intended. (See page 88.)
• Also keep in mind that the overall Chorus
effect depends on the Chorus Return set-
ting in the All Part controls (page 133).