Filter
Top Products
14
MU128of the MU90R
The Controls of the MU128
1 A/D INPUT 1, 2 jacks
For connection of a microphone, electric guitar or other electronic instruments
(1/4” mono).
2 A/D INPUT VOLUME control
For control of the level of the A/D inputs.
3 VOLUME control
For adjusting the overall volume of the MU128. (This does not affect the exter-
nal signal received via the rear panel INPUT jacks.).
4 STAND BY/ON switch (Power Switch)
Pressing this turns the power on and off (stand by).
1
CAUTION
Even when the switch is in the “STAND BY” position, electricity is still flowing to the
instrument at the minimum level. When you are not using the MU128, make sure you
unplug the AC power adaptor from the wall AC outlet.
5 MIDI IN A terminal (front panel)
For connection to other MIDI devices, such as a MIDI keyboard or sequencer.
When the HOST SELECT switch is set to “MIDI,” this receives MIDI data for
controlling Parts set to receive over channels A01 - A16. When the HOST
SELECT switch is set to “Mac,” “PC-1,” or “PC-2,” it transmits the received
MIDI data to the TO HOST terminal. The front panel MIDI IN A terminal can
be selected for operation in the Utility mode (page 157). A rear panel MIDI
IN-A terminal is also provided; however both the front and rear panel termi-
nals cannot be used simultaneously.
6 PHONES jack
For connection to a set of stereo headphones (stereo mini pin).
The Controls of the MU128
Front Panel
TONE GENERATOR
XG
TG
300
B
PERFORM
MODE EQ
UTIL EFFECT
PLAY EDIT
ALL
MUTE/
SOLO
PART
PART
SELECT
VALUE
SELECT
VALUE
ENTER
EXIT
SELECT
PART GROUP
StringsBassGuitarOrgan
Chrom.perc.
Piano
Ensemble Brass Reed Pipe Synth lead Synth pad
DrumModel excl.SFXPercussiveEthnic
Synth effects
PHONESMIDI IN A
STAND BY
ON
VOLUME
2
PART VOL EXP PAN
BANK/PGM
REV CHO VAR KEY
A/D INPUT
1
MU PLG-1 PLG-2 PLG-3
1
4
2
5 6 JLK
39A8:
DEF
G
H
I
BCM
7 N