Filter
Top Products
148
MU128 Effect Edit Mode
Chorus Pan (ChoPan)
Range: L63 — C — R63
This determines the Pan position of the
Chorus sound, or where it appears in the
stereo image.
Send Chorus to Reverb (SendCho →
Rev)
Range: 000 — 127
This determines the level of the Chorus
signal sent to and processed by the Re-
verb effect. A setting of 000 results in
none of the Chorus-processed signal go-
ing to the Reverb.
HINT
Setting this to a relatively high level gives you a
more natural sound, since the Chorus-processed
sound is also being processed by the reverb.
For details on the parameters for each
Chorus Type, refer to the separate
SOUND LIST & MIDI DATA booklet.
Type
Settings: NO EFFECT; CHORUS 1 —
4; CELESTE 1 — 4;
FLANGER 1 — 3; SYM-
PHONIC; ENSEMBLE
DETUNE; PHASER 1
This determines the Chorus Type. De-
pending on the Type selected, the specific
parameters and values may differ.
Chorus 1 and 2 are used to subtly enhance
the sound, and generally make it richer,
fatter and warmer. Flanger uses modula-
tion to create an animated, swirling mo-
tion effect, and produces a characteristic
metallic sound. Symphonic also subtly
enhances the sound by making a single
instrument Voice sound like several.
Phaser is similar to Flanger, but with a
stronger and deeper modulation.
NOTE
When NO EFFECT is selected, Chorus is off
and none of the other Chorus parameters are
available (with the exception of the Chorus
Pan and Send Chorus to Reverb parameters).
Chorus (CHO)
The Chorus section uses pitch modulation to create a variety of rich, spa-
cious-sounding effects, including Chorus, Flanger, Symphonic and Phaser.
Explanations of the Chorus Type, Chorus Pan, and Send Chorus to Reverb
parameters are given below. For descriptions and explanations for all other
Chorus parameters, refer to the separate SOUND LIST & MIDI DATA
booklet.
Chorus (CHO)