Filter
Top Products
MU128 Effect Edit Mode
151
English
Type
Settings: THRU; HALL 1 — 2; ROOM
1 — 3; STAGE 1 — 2;
PLATE; DELAY L,C,R;
DELAY L,R; ECHO; CROSS
DELAY; KARAOKE 1 — 3;
CHORUS 1 — 4; CELESTE
1 — 4; FLANGER 1 — 3;
SYMPHONIC; ENSEMBLE
DETUNE; ROTARY
SPEAKER; TREMOLO;
AUTO PAN; PHASER 1;
DISTORTION; OVER
DRIVE; AMP SIMULATOR;
3BAND EQ (MONO);
2BAND EQ (STEREO);
AUTO WAH (LFO); TOUCH
WAH 1 — 2, HARMONIC
ENHANCER*, COMPRES-
SOR; NOISE GATE
*The Harmonic Enhancer produces
the same effect as its MUseries
predecessor.
NOTE
When Thru is selected, no effect is applied,
and none of the parameters are available
(with the exception of the assignable Con-
troller and the Part parameter).
Dry/Wet Balance
Range: D63>W — (D=W) — D<W63
This determines the balance between the
direct, unprocessed signal (dry) and the pro-
cessed sound (wet).
Insertion 1, 2 (INS 1, 2)
The Insertion 1 and 2 effects provide additional effects for processing indi-
vidual Parts.
Explanations of the Type, Dry/Wet Balance and Part parameters are given
below. For descriptions and explanations for all other parameters, refer to
the separate SOUND LIST & MIDI DATA booklet.
The Insertion effects are set up for Insertion routing and can be applied only
to a single selected Part. Refer to About the Effect Connections — System
and Insertion on page 152 for more information.
Insertion 1, 2 (INS 1, 2)
Assignable Controller 1 Insertion 1/2
Control (AC1INS1/2Ctrl)
Range: –64 — +63
This determines the degree to which As-
signable Controller 1 (AC1) affects the
MIDI-controllable parameters of the In-
sertion effects. Each of the Insertion ef-
fect types have one parameter which can
be controlled by the AC1. (For details,
see the “Effect Parameter List” of the
“SOUND LIST & MIDI DATA” book-
let.) This parameter is not available in the
Performance mode.
Insertion 1, 2 Part (INS 1, 2 Part)
Range: Part 1 — 64, AD01, AD02, off
This determines the Part to which the In-
sertion effect is applied. Insertion can be
applied to only one Part at a time.