Filter
Top Products
144
Chapter 3: Reference
Importing Netlist and ASCII Files
Manual Setup/Hold Option
When you select Manual Setup/Hold, the following options appear.
Label Selection
List Lets you select the label whose setup/hold window will be
positioned.
All bits Specifies that the setting is for all bits on the label.
Individual bits Specifies that the setting is for a single bit on the label.
Bit: When Individual bits is selected, this field identifies the
single bit.
Setup: Specifies the front edge of the setup/hold window relative
to the sampling clock. Setup times are positive when the
position is before the sampling clock.
Hold: Specifies the back edge of the setup/hold window relative
to the sampling clock. Hold times are positive when the