Filter
Top Products
117
Chapter 3: Reference
The Sampling Tab
State Mode
When you select State Mode, the State Mode Controls area appears.
200 MHz/400
MHz State
Speed
Configuration Lets you configure the state analyzer for faster sampling,
but with clocking restricted to the J clock on Pod 1 of the
master card and triggering restricted to two trigger
functions.
Trigger Position Lets you specify where the sample that triggered the
analyzer should appear among all the other samples that
are stored in acquisition memory.
Acquisition
Depth Lets you use a smaller portion of the acquisition memory
and speed up processing of the captured data.
Clock Setup Lets you specify: the clock mode, the clock signal edges
from the device under test that will be used as the sampling
clock, and the clock input signal levels (from the device