Filter
Top Products
Coring Head Service Latch
Whenever service is to be performed on coring head
components, fully raise coring head and install service
latch (Fig. 3).
Before using machine, remove service latch from coring
head.
1
Figure 3
1. Service latch (in raised, locked position)
Coring Head Adjustments
See Operator’s Manual for adjustment procedures for
the coring head on the ProCore 648.
CAUTION
gine, remove key from the ignition switch and
install the coring head service latch before per-
Never work on the coring head with the engine
running. Always fully raise coring head, stop en-
forming any service to coring head components.
ProCore 648 Page 7 – 3 Coring Head
Coring Head