Filter
Top Products
Fuses
The fuse block is located behind the console cover (Fig.
27).
Identification, Function, and Wiring
The fuses are held in the fuse block. Use Figure 28 to
identify each individual fuse and its correct amperage.
Each fuse holder has the following functions:
Fuse 1 (20 Amp): Supplies power to ignition switch
terminal B.
Fuse 2 (10 Amp): Supplies power to electric clutch.
Fuse 3 (10 Amp): Supplies power from ignition
switch terminal S.
Fuse 4 (2 Amp): Supplies power to aerator control
module.
Testing
Remove fuses from the fuse block for testing. Fuse
should have continuity between fuse terminals.
1
Figure 27
1. Fuse block
Fuse 1
Fuse 2
Fuse 3
Fuse 4
2A
10A
20A
10A
UP
Electrical
System
Figure 28
ProCore 648
Page 5 – 21
Electrical System