Filter
Top Products
Front Panel Operations
Operating Modes
2
2-27
3/bAd is displayed (see Figure 2-16). Err4/bAd indicates the internal memory is full,
saving only the most recent 75 scans. The new card is updated with the scans in memory.
Memory Card Data Extraction
Measurement data recorded onto a memory card can be read only by a PC running
Starter or Logger applications software. If you want to have a copy of the measurement
data when it is being recorded, connect a printer during scan operations (see Chapter 5,
Printer Operation). If using a printer, verify the data destination is "both" (memory
card/printer) (see Figure 5-3).
SCAN
Starting the Scan Mode. Press the SCAN key to
start scanning. If the data destination includes
the memory card and a data file has not been
opened, a dAtxx file will be displayed. If an error
message appears, refer to Figure 2-16.
SHIFT
SCAN
CH
SCAN
SCAN
- OFF -
Stopping the Scan Mode. Press the SCAN key
again to stop the scan mode (-OFF- will be
displayed momentarily). If SCAN is pressed
during the measurement interval, the
measurements will be completed.
Starting the Single Scan Mode. Press the
SHIFT key then then SCAN key for a single
measure-ment scan. If the data destination
includes the memory card and a data file has not
been opened, a dAtxx file will be displayed. If an
error message appears, refer to Figure 2-16.
SCAN
SCAN ON
SCAN OFF
SINGLE
SCAN
0:00:00
SCAN
CH
0:00:00
ENTER
OPEn
dAtxx
Opening a Data (dAtxx) File. Press ENTER to
open the suggested file or use the cursor keys to
select a file name (00 to 99), then press ENTER.
If an error message appears, refer to Figure
2–16. Press the CANCL key to exit without
opening a file or starting scanning.
ENTER
OPEn
dAtxx
Opening a Data (dAtxx) File. The suggested
dAtxx file can be opened by pressing ENTER, or
the cursor keys can be used to select a file name
(00 to 99), then press ENTER. If an error
message appears, refer to Figure 2-16. Press
the CANCL key to exit without opening a file.
Path to
OPEn
dAtxx
menu.
Path to
OPEn
dAtxx
menu.
op27f.eps
Figure 2-15. Using the Scan Mode